A4

Advanced Reinforced Carbon reduces torque and increases strength.

Scott is the leader in carbon blank reinforcements. Our latest ARC technology adds hoop strength to our blanks without adding weight, and counteracts torque that can reduce casting accuracy and line control.

Every Scott rod is made from beginning to end in Montrose, Colorado.

We take our mission to handcraft high performance rods very seriously. We use the knowledge gained from forty years of design experience with our commitment to handcraft every fly rod we make to give you top performance and benchmark quality. It's in all the little details that exceptional rods are distinguished from merely good rods.

Fine-tuned flex and recovery.

Scott pioneered the use of multi modulus fiber lay ups in blank design.

By varying the fiber tensile modulus along the length of the rod, we’re able to precisely control the stiffness and recovery speed of our blanks.

The result is a rod that loads and unloads more smoothly.

Walk down a rod rack at your local fly shop and you'll notice something different about Scott rods. Like everything we do, the Scott Natural Finish is all about making your rod lighter, more durable, and better performing.

Most other rods on the shelf are run through a belt sander, tearing away the outside power fibers of the blank and introducing variance. Inadvertent flatspotting during the sanding process will weaken a blank, and blanks are designed with a margin of error to accommodate for oversanding. After the blank is sanded, a glossy paint is applied to add shelf appeal.

Natural finish blanks aren't subjected to the rip through the sanding belt, nor are they covered with heavy paint to add pop in your fly shop. We're firm believers in the natural beauty of graphite. A natural finish blank is built to exacting tolerances. Scott's advanced resin systems permeate the blank, leaving a durable finish that will stand up to years of abuse.

Scott’s proprietary S2 glass is an innovative highly unidirectional glass and epoxy composite that helps us continue to advance fiberglass rod design.

Our glass rods are light, responsive, and exhibit the highest recovery speeds in fiberglass rods. Now you get all the feel of glass with high performance.

With the highest strength to weight ratio and corrosion resistance of any metal, our titanium guide frames let you worry about the fishing, and not about the salt.

When we set out to build the best fly rods, we knew that we had to use the best components. We use guides made from materials chosen for their strength, lightness, and corrosion resistance. Frames are made from pure titanium - 65% lighter than equivalent stainless steel guides, and 100% corrosion resistant. Silicon carbide (SiC) rings are diamond polished to create the smoothest surface of any ceramic material. Just like our frames, SiC is resistant to abrasion, corrosion, and thermal shock.

Why would you want guides made from anything else?

Enhanced feel, incredible stability and unequalled performance. X-Core combines the industry’s leading composite technologies with cutting edge design.

Diameter is proportional to stiffness and strength, and X-Core, or Expanded Core, technology delivers blanks that transmit feel and maintain stability better than any other design approach.

We use fast taper mandrels with low-mass, thin-walled blanks and proprietary ARC reinforcement to create rods that have stiffness with feel, and stability with sensitivity.

This design helps the rod come alive in your hands. It’s a superior approach to the slow taper, thick walled designs that deliver stiffness at the expense of feel.

Our all new FiberFuse enhanced resin system uses new chemistry to create bonds between each graphite fiber that are over 20% stronger than conventional epoxy resins.

ReAct technology combines our X-Core design with a new complex materials and taper system to create a break-through in fast action rod design. Distance, control and accuracy are compromised by waves that vibrate in the rod, even after the cast has been made. Simply making the rod stiffer to stop these vibrations kills feel. ReAct counteracts energy sapping vibrations by speeding the recovery of the blank without the need to stiffen the rod with more material. This puts the feel in fast. And that’s a really good thing.

These new, patented, American made guides from Snake Brand feature radius feet which conform to the blank, have the best corrosion resistance, and even have a self-lubricating finish to shoot line farther.

Another first, brought to you by Scott.

Most reelseats are made with a glossy, thin, and easily marred type 2 anodize. Scratches in type 2 anodize expose the aluminum underneath, leading to worn finishes and potential for corrosion.

Our Mil-Spec III anodize penetrates the surface of the aluminum, creating the hardest, most durable, and most corrosion resistant finish available. Mil-Spec III prevents galvanic reactions with dissimilar metals and is resistant to temperatures above 900 degrees fahrenheit.